English    Įśėćąšńźč

Engineering Products

  • Railroad Maintenance and Repair Machines


  • We produce engineering products in the range of Railroad Maintenance and Repair Machines.

    Railroad maintenance and
    repair machines

    Railroad Straightening Machine 500/1000

    This machine is intended for use in railroad construction and maintenance works. It is a self-propelled type with automatic rail clamping, capable of lifting the track at a fixed height and angle. Enables lifting and moving of track either leftwards or rightwards.

    Screwing Machine – TGM – 50 – 2

    This machine is designed for mechanized screwing and unscrewing of bolts and nuts.

    Rail Drilling Machine – RPM – 35 – 01

    This machine is designed for drilling holes in the rail neck.

    Sleeper Drilling Machine – TPM – 22

    It is used for drilling boltholes in wooden sleepers.

    Rail Cutting Machine - MRO – S

    Rail cutting machine ĢŠĪ – S is used during assembly and repair works on the track. The rail cutting is performed by means of an abrasive disk.

    Rail Grinder – MSR –Õ

    This machine is intended for final grinding of aluminothermic welds and for changing the railhead profile.

    Portable Warming Station – PPS – 4/12

    This system is intended for warming up of rails to the temperature required for aluminothermic welding.

    Sleeper Drilling Machine – ŅĻĢ – 2 ŃÕ

    Sleeper drilling machine – TPM-2SH is intended for drilling holes in wooden sleepers.

    Rail Jack – KRC

    This rail jack is intended for lifting and centering of rails during aluminothermic welding. It is used for precise centering of the welded rails. It enables precise lifting, movement and rotation of the rail round its longitudinal axis.

    Mechanical Rail Jack – KRM-75

    It provides for easy track assembling and repair. Ensures precise lifting and quick downward moving of the rail by pressing the retain button.


    Hydro aggregate – 3.6

    Hydro aggregate 3.6 is used during assembly and repair works on the track. It is designed for feeding the hydraulic devices that operate with hydraulic cylinders.


    Hydraulic Hand Pump – PHR-35-2

    This two-phase hydraulic hand pump serves as an aggregate by providing operating pressure of Š= 35 KPa

    Hydraulic Chisel

    This chisel is intended for cleaning the welds after butt-welding of rails. It can be used for either rail type 49 or 60, depending on the accessories in the tool set.

    Rail Gap Adjuster – DM – 130

    Rail Gap Adjuster DM-2 is used during assembly and repair works on the track. It is used for adjusting the gap between consecutive rails. The Rail Gap Adjuster operates with Hydro aggregate 3.6 (art.¹ 6004).

    Rail Gap Adjuster – DM – 2

    Rail Gap Adjuster DM-2 is used during assembly and repair works on the track. It is used for adjusting the gap between consecutive rails. The Rail Gap Adjuster operates with Hydro aggregate 3.6 (art.¹ 6004).

    Hydraulic Nut Splitter- HGR-ER

    Hydraulic nut splitter- HGR-ER is intended for removal of deformed or corroded nuts by cutting

    Trolley type “LX-1435-1000”

    This trolley is designed for transportation of rails and assembled panels.

    Ratchet Wrench – TG – 39

    Ratchet wrench TG 39 is designed for hand screwing and unscrewing of joint tie nuts

    Lubricator – L – 9

    Mechanical lubricator L9 is intended for lubricating rails type P 49. It is installed on curvilinear track sectors.

    PETROL IMPACT WRENCH

    The Petrol Impact Wrench is intended for assembling and disassembling of screw joints with bolts up to 32 mm.

    Insulated joints

    The Insulated joints serve as a solid connection between two consecutive rails.